|
| 100 Series Passives |
| Manufacturer: Lindsay Broadband |
| Features:
Lindsay’s patented centre conductor seizure mechanism minimizes common path distortion and microreflections. Large contact area with high clamping pressure and direct motherboard transfer increases current handling while eliminating centre conductor distortion and plating fractures. This proven new technology results in increased reliab... |
|
|
|
|
|
| 8000 Series1 GHz Distribution Amplifier |
| Manufacturer: Lindsay Broadband |
| General Description :
The 8000 Series amplifier is a multiport, two way amplifier using a 2 part aluminum housing (base and lid).
Two base models are available;the 8200 Single Output Trunk Amplifier and the 8400 Four Port Distribution Amplifier.The base is a rugged aluminum housing heavily ribbed for heat dissipation, with exterior co-... |
|
|
|
|
|
| 9000HAP Hardened Access Point |
| Manufacturer: Lindsay Broadband |
| The Lindsay 9000HAP series access points are specifically designed for the harsh environmental demands of world wide outdoor deployment of wireless communications. It is no longer necessary to kludge together a protection system for outdoor access points and controllers. The 9000HAP provides fully integrated surge and lightning protection and maxim... |
|
|
|
|
|
| DOCSISGateway |
| Manufacturer: Lindsay Broadband |
| The DOCSIS Gateway allows the use of any low voltage Access Point on the HFC strand. You can use Lindsay recommended Mikrotik Access Points or Access Points from Ubiquiti, Compex, Alcon, etc. You can use any AP that accepts 12Vdc passive POE (4,6+, 7,8-) and that does not require more than 8 Watts. Other IP devices that meet the voltage and power r... |
|
|
|
|
|
| DocsisLoop |
| Manufacturer: Lindsay Broadband |
| The Lindsay Broadband’s DOCSISLoop is a RCA DCM425 Cable modem in a surge hardened weatherproof box, complete with power supply, test-points, and separate pad sockets for forward and reverse paths. It is used for end of line status monitoring.
All of the following features are include:
• Important line quality indications such as Received Sign... |
|
|
|
|
|
| LHA35-RM 1GHz |
| Manufacturer: Lindsay Broadband |
| LHA series CATV Distribution Amplifiers with active return are broadband indoor GaAs-Fet / PushPull distribution amplifiers designed for RF distribution systems such as those in Cable Television Apartments, Hotels, Hospitals and other applications where a high quality low noise figure amplifier is necessary to amplify the signals in both the forwar... |
|
|
|
|
|
| SMHAP Strand Mounted Hardened Access Point |
| Manufacturer: Lindsay Broadband |
| The Lindsay SMHAP (Strand Mounted Hardened Access Point) is a strand mounted cable plant powered, 40-90 VAC access point and can be configured for POE (power over Ethernet). This CATV hardened and standards based wireless access controller is completely housed in a 15-PSI water and EMI proof aluminum housing. To ensure consistency for your technici... |
|
|
|
|
|
| Wireless CPE |
| Manufacturer: Lindsay Broadband |
| Extend your plant to previously unavailable customers with wireless bridging available from Lindsay’s wireless CPE devices. By using the same Router Boards that are in the HAP and WAZU outdoor hardened equipment, consistent management interfaces and feature sets are maintained. An end-to-end Lindsay based solution can also benefit from protocols su... |
|
|
|
|